Raritan Dominion KX II-101-V2, Руководство пользователя

Страница: 27 / 213

Chapter 2: Installation and Configuration
19
d. Enter the Gateway IP Address.
e. Link-Local IP Address. This address is automatically assigned to
the device, and is used for neighbor discovery or when no
routers are present.
Read-Only
f. Zone ID. Identifies the device the address is associated with.
Read-Only
g. Select an IP Auto Configuration option:

None (Static IP) - this option requires you manually specify the
network parameters.
This is the recommended option because the KX II-101-V2 is an
infrastructure device, and its IP address should not change.
Select this option if you want to ensure redundant failover
capabilities should the primary Ethernet port (or the switch/router
to which it is connected) fail. If it fails, KX II-101-V2 switches to
the secondary network port with the same IP address, ensuring
their is no interruption.
If None is selected, the following Network Basic Settings fields
are enabled: Global/Unique IP Address, Prefix Length, and
Gateway IP Address allowing you to manually set the IP
configuration.

Router Discovery - use this option to automatically assign IPv6
addresses that have Global or Unique Local significance beyond
that of the Link Local, which only applies to a directly connected
subnet.
2. Next, configure DNS settings.
Configure the DNS Settings
1. Select Obtain DNS Server Address Automatically if DHCP is
selected and Obtain DNS Server Address is enabled. When Obtain
DNS Server Address Automatically, the DNS information provided by
the DHCP server will be used.
2. If Use the Following DNS Server Addresses is selected, whether or
not DHCP is selected, the addresses entered in this section is used
to connect to the DNS server.
Enter the following information if the Following DNS Server
Addresses is selected. These addresses are the primary and
secondary DNS addresses used if the primary DNS server
connection is lost due to an outage.
a. Primary DNS Server IP Address
b. Secondary DNS Server IP Address
3. When finished, click OK.
Your KX II-101-V2 device is now network accessible.