Dominion KX II-101-V2 Quick Setup Guide
2
QSG-KX2101V2-v3.6.0-0E-E
255-62-3058-00-RoHS
Set the mouse motion speed setting to exactly the middle
speed
Disable the "Enhance pointer precision" option
Disable the Snap To option
Disable transition effects:
Deselect the "Use the following transition effect for menus
and tooltips" option
Windows 2000 Mouse Settings
Configure these Windows 2000
®
mouse settings:
Configure the Motion settings:
Set the acceleration to None
Set the mouse motion speed setting to exactly the middle
speed
Disable transition effects:
Deselect the "Use the following transition effect for menus
and tooltips" option
Apple Mac Mouse Settings
Absolute Mouse Synchronization is required for proper mouse
synchronization on KVM target servers running a Mac
®
operating system.
To enter Absolute Mouse Synchronization:
Choose Mouse > Absolute in the KVM client.
Linux Mouse Settings
Configure these Linux
®
mouse settings:
(Standard Mouse Mode only) Set the mouse acceleration
to exactly 1 and set the threshold to exactly 1. Enter the
following command:
xset mouse 1 1
. This should be
set for execution upon login.
Sun Solaris Mouse Settings
Configure these Sun
®
Solaris
™
mouse settings:
Set the mouse acceleration value to exactly 1 and the
threshold to exactly 1
Ensure that your video card is set to a supported
resolution and that its output is VGA, not composite sync
IBM AIX Mouse Settings
Configure these IBM AIX
®
mouse settings:
Go to the Style Manager, click on Mouse Settings and set
Mouse Acceleration to 1.0 and Threshold to 3.0
QS R ule
Step 2: Configure Network Firewall Settings
TCP Port 5000
Allow network and firewall communication on TCP Port 5000
to enable remote access to KX II-101-V2.
Alternatively, configure KX II-101-V2 to use a different TCP
port, then allow communication on that port.
TCP Port 443
Allow access to TCP Port 443 (Standard HTTPS) so you can
access KX II-101-V2 via a web browser.
TCP Port 80
Allow access to TCP Port 80 (Standard HTTP) to enable
automatic redirection of HTTP requests to HTTPS.
QS R ule
Step 3: Connect the Equipment
Power
The KX II-101-V2 is powered by a 100-240V AC input and
5VDC output power adaptor that is included with the device.
For standard AC power, plug the included AC power adaptor
into the Power port and plug the other end into a nearby AC
power outlet.
Network
Connect a standard Ethernet cable from the network port
labeled LAN to an Ethernet switch, hub or router.
The LAN LEDs that appear above the Ethernet connection
indicate Ethernet activity.
The yellow one blinks while KX II-101-V2 is in use, indicating
IP traffic at 10 Mbps.
The green light indicates a 100 Mbps connection speed.
Target Server
Use either the PS/2 or USB to connect to the target.
