Raritan Cat5 Reach DVI, Руководство пользователя

Страница: 10 / 44

Chapter 1: Introduction
6
Number Items Description
RJ-45 LINK Port Connect to the receiver via a Cat5e/6 cable.
There are two tiny LEDs adjacent to this
port.

Green indicates a physical link and
activity.

Yellow indicates communications at
10/100 BaseT speeds.
F/W Upgrade
Port Used to upgrade the firmware of the
transmitter.
Important: When using the DVI-I to VGA adapter, always connect "both"
adapters and "both" VGA devices to both DVI ports of the transmitter.
See Supported and Unsupported Video Connections to Transmitter (on
page 35)
Cat5 Reach DVI Receiver
The receiver is connected to the remote console.
Front View
Number Items Description
LINK LED
(green) Indicate the cable connection status
between the transmitter and receiver.

On: The physical connection to the
transmitter is detected.

Off: No physical connection to the
transmitter is detected.
Power LED
(red) Indicate the power state.

On: The receiver is powered on.

Off: The receiver is powered off.
EDID button Press the EDID button only when you need
to synchronize the video resolutions.