To select an option, use the arrow keys to move the highlighted entry, then press
<Return>
to select the
highlighted entry. Note that depending on your selected boot medium, you may need to edit the Linux command
line parameters before booting via the “e” command. Most current ppc64/ppc64el boot media assumes that the
serial console will be the primary method of early and low level I/O; if you are not using the serial console, you
may need to adjust the
console
parameter of the Linux command line appropriately.
BMC ACCESS
Certain operations require BMC access to execute. The C1P9S01 BMC is attached to network port 3 via NCSI,
and is configured to request an IP address via DHCP. Once it is connected and has a valid IP address, you can
log in via SSH using the following default credentials:
Username: root
Password: 0penBmc
NOTE:
It is strongly recommended that you change this default password immediately after login via the
passwd
command on the BMC.
HOST FIRMWARE UPDATES
Host firmware updates are controlled by the BMC. To update firmware, power down the host system but leave
the system connected to wall power. Transfer the PNOR image to the BMC
/tmp/
directory using
scp
, then
execute
pflash -E -p /tmp/<filename>.pnor
to update the host firmware.
BMC FIRMWARE UPDATES
BMC firmware updates are controlled by the BMC. To update firmware, power down the host system but leave
© 2017 - 2019 Raptor Computing Systems, LLC
C1P9S01 User's Guide Version 1.00
All Rights Reserved
54
