30
10.3 Contrast Modification (XCAP Std. Only)
The image contrast can be modified from the
“Contrast Modification”
section under the
“Modify”
tab in the XCAP imaging window. Figure 23 shows where this setting can be found.
Raptor recommends having this enabled at all times when imaging the camera. If applying
ROI or binning controls, the contrast modification will have to be re-enabled each time.
In the contrast modification box, that can be seen from Figure 24, select
“Stretch Contrast,
Histogram Percentile Endpoints”
and click
“preview”.
The contrast modification will now be
applied over the live image feed. The contrast can be adjusted using the low and high end
percentile point controls. The default settings are usually adequate for most applications.
NOTE: This control feature is only applicable with XCAP Std.
Figure 23: Contrast Modification Location on Toolbar.
Figure 24: Contrast Modification.
