Rapido GMD-1, Руководство по эксплуатации продукта

Страница: 14 / 16

14
GMD-1 SOUND VOLUME SETTINGS
FUNCTION CV DEFAULT RANGE YOUR VALUE
MASTER VOLUME 63 40 0-192
DIESEL VOLUME 259 128 0-128
HORN VOLUME 275 128 0-128
BELL VOLUME 283 99 0-128
COUPLER SOUND VOLUME 291 128 0-128
ODD VOLUME 299 128 0-128
ODD VOLUME #2 307 128 0-128
RADIATOR FAN VOLUME 315 90 0-128
ODD VOLUME #3 323 128 0-128
ODD VOLUME #4 331 128 0-128
DOPPLER HORN VOLUME 339 128 0-128
SHORT AIR LET OFF VOLUME 363 128 0-128
FAST SARCO VALVE VOLUME 371 80 0-128
SLOW SARCO VALVE VOLUME 387 80 0-128
SARCO VALVE AT SHUTDOWN VOLUME 395 80 0-128
ODD VOLUME #5 403 128 0-128
RANDOM SOUND VOLUME 451 90 0-128
BRAKE SQUEAL VOLUME 459 128 0-128
FaCTORY RESET
On your GMD-1, you perform a factory reset by entering a value of “8” into CV 8. Note
that this will cause all of your new volume and motor settings to be lost, so you will need
to reprogram any settings that you want to keep. You did keep notes like we suggested
earlier, didn’t you?
You can NOT lose all of the pre-recorded sounds on your GMD-1 decoder by doing a
factory reset. This is a myth about ESU decoders that was related to function mapping
settings using an early version of JMRI. Even then the sounds were still there; they were
just not mapped to the proper function buttons. ESU has changed their software so that
this cannot happen again. If you manage to lose all of the sounds on your GMD-1 then
you have probably set fire to your decoder with a voltage spike. Open up your GMD-1
and pour out the ashes.