3.2 Inflation & Deflation
3.2.1
Set the desired pressure, refer to Section 3.1 for the function oft each Switch
3.2.2
Connect the hose to the tyre, ensure the hose is connected securely. Air leaks
will cause an error message to be displayed, refer to Section 4.0.
3.2.3
The Pressure in the tyre will be displayed.
3.2.4
The unit will inflate or defalte the tyre to the set pressure. Periodically the
process will stop and display the pressure in the tyre.
3.2.5
If the pressure in the tyre is less than 3psi, 20kPa or 0,2bar the process will not
commence until the ‚Flat Tyre Only‘ Switch is pressed, refer Section 3.1.
3.2.6
The scroll bar will indicate that the unit is inflating or deflating, see below
3.2.7
When the set pressure is reached the display will flash and the unit will beep
five (5) times. This will continue until the hose is disconnected, during this time
the keypad will be disabled.
3.3 Volume Adjustment
3.3.1
Turn off the unit
3.3.2
Press and hold the Decrease and ‚Flat Tyre Only‘ switches, refer to Section 3.1.
3.3.3
Turn the unit on, VOL will be displayed.
3.3.4
Adjust the volume using the Increase and Decrease switches, refer to Section
3.1.
3.3.5
To store the settings press the ‚Flat Tyre Only‘ switch. Further changes can be
made by repeating the above procedure.
6
+49 (6158) 92980-0
