1800 011 000
Rapid Spray How To Guides
Singleton NSW 2330
SETTING HOME POSITION (
X
)
To adjust length of slow down zone:
1.
Switch power on and ensure reel is in standby (
0
)
2.
Make sure the hose is wound to the desired stopping position. This may be where the
hose stopper is almost touching the hose guide rollers for the smaller sprayer or further
out for a larger sprayer if the spray gun holder is mounted away from the reel.
3.
Press and hold both the
and
buttons on the control panel until the display
flashes with the current setting (approx. 5 seconds). This will be the letter
X
followed by
a number from
0
to
9
indicating how many revolutions before the stopping position
the slowdown will occur.
4.
If the current
X
value is suitable, just press the
↵
(return button) and the hose position
will be updated.
5.
If you wish to change the slowdown position for your application, after step 3 above,
press the
button to reduce the
X
value or the
to increase it. Press the
↵
button to
save the setting.
6.
To disable the slowdown zone, set the value to
X0
SETTING THE HOSE TENSION (
5d
)
If you are finding reel is unwinding when hose reel is not in use or is not unwinding easily
when it is in use, follow the below instructions to change the hose tension.
1.
Enter Setup Mode (
5V
) - see above instructions.
2.
Choose the parameter
br
. Change Auto Braking setting from
0M
to
0FF
. Save new
value pressing the
↵
button.
3.
Choose the parameter
5d
. The default will be set to
5
.
4.
Set the tension control levels from
1
(low) to
9
(high).
5.
To save new value press, the
↵
button.
