Rapid Spray How To Guides
1800 011 000
Singleton NSW 2330
NOTE:
For use with AC power adaptor,
br
must be
0F
and
5d
must be set to
0
if the reel
is not connected to a battery i.e. if only connected to an AC adapter power supply. This is
because the electric braking generates power that must be directed to a suitable source like
charging the battery. If no battery present, the AC power adapter will be destroyed.
SETUP MODE
WARNING
: This level is for technician use only. Incorrect setting can cause reel malfunction.
•
= Auto braking,
0m
or
0f
.
If
0m
then
5D
setting is void.
•
= Direction of rotation;
Mr
= normal,
rr
= reversed.
•
= Battery low voltage cut out
Default =
9
for 12V battery;
18
for 24V system.
•
= Slow speed RPM (this changes when MyPace is changed)
•
= Fast speed RPM (Max speed before slowdown zone:
80
for 50m reel,
60
for 100 / 150m reels.
•
= max current setting AMPs (default
20
)
•
= Hose speed correction factor (depends on reel and hose size mostly; default
1
.
3
•
= Drag level (tension control) to reduce free spooling overrun (default
5
). Void if
br
is
0m
.
Tension control levels from
1
(low) to
9
(high).
br
bV
lc
5r
fr
51
XP
5d
1. Switch power on and ensure reel is in standby (0).
2. Press ▽ and
↵
together for 5 seconds; display will change to
5V
(
flashing).
3. Acknowledge with
↵
. If not acknowledged within 3 seconds, exits Setup mode. If
acknowledged, then steady
5V
will show.
4. Use ▽ and △ to step between setup parameters below.
5. ↵
selects and displays the parameter value.
6. Use ▽ or △ to change the parameter value.
7. ↵
Saves the new value.
8. Used * or * to step between the parameters until back at
5V
.
9. ↵
will exit and return to standby (
0
).
Available parameters.
