background image

SECTION 21: T

HE

 RAPID™ NP L

IMITED

 W

ARRANTY

  

91 of 91

SECTION 21: THE RAPID™ NP LIMITED WARRANTY
RAPID ENGINEERING LLC WILL PAY FOR:

Within 36 months from date of p

u

rchase by b

u

yer or 42 

months from date of shipment by Rapid Engineering LLC 
(

w

hichever occ

u

rs first), replacement parts 

w

ill be provided 

free of charge for any part of the prod

u

ct 

w

hich fails d

u

e to 

a man

u

fact

u

ring or material defect. 

Rapid Engineering LLC 

w

ill req

u

ire the part in q

u

estion to 

be ret

u

rned to the factory. Rapid Engineering LLC 

w

ill, at 

its sole discretion, repair or replace after determining the 
nat

u

re of the defect and disposition of part in q

u

estion. 

RAPID

 Replacement Parts are 

w

arranted for a period of 

12 months from date of shipment from Rapid Engineering 
LLC or the remaining RAPID™ NP 

w

arranty.

RAPID ENGINEERING LLC WILL NOT PAY FOR:

Service trips, service calls and labor charges.
Shipment of replacement parts.
Claims 

w

here the total price of the goods have not 

been paid.
Damage d

u

e to:

• Improper installation, operation or maintenance.
• Mis

u

se, ab

u

se, neglect, or modification of the 

RAPID™ NP in any 

w

ay.

• Use of the RAPID™ NP for other than its intended 

p

u

rpose.

• Incorrect gas or electrical s

u

pply, accident, fire, floods, 

acts of God, 

w

ar, terrorism, or other cas

u

alty.

• Improper service, 

u

se of replacement parts or 

accessories not specified by Rapid Engineering LLC.

• Fail

u

re to install or maintain the RAPID™ NP as 

directed in the Installation, Operation and Service 
man

u

al.

• Relocation of the RAPID™ NP after initial installation
• The 

u

se of the RAPID™ NP in a corrosive atmosphere 

containing contaminants.

• The 

u

se of the RAPID™ NP in the vicinity of a 

comb

u

stible or explosive material.

• Any defect in the RAPID™ NP arising from a dra

w

ing, 

design, or specification s

u

pplied by or on behalf of the 

cons

u

mer.

• Damage inc

u

rred d

u

ring shipment. Claim m

u

st be filed 

w

ith carrier.

WARRANTY IS VOID IF:

The RAPID™ NP is not installed by an contractor q

u

alified 

in the installation and service of gas fired heating 
eq

u

ipment.

Yo

u

 cannot prove original p

u

rchase date and req

u

ired 

ann

u

al maintenance history.

The data plate and/or serial n

u

mber are removed, 

defaced, modified or altered in any 

w

ay.

The o

w

nership of the RAPID™ NP is moved or 

transferred. This 

w

arranty is nontransferable.

Rapid Engineering LLC is not permitted to inspect the 
damaged eq

u

ipment and/or component parts.

READ YOUR INSTALLATION, OPERATION AND 
SERVICE MANUAL.

If yo

u

 have q

u

estions abo

u

t yo

u

r eq

u

ipment, contact yo

u

installing professional. Sho

u

ld yo

u

 need Replacement 

Parts or have additional q

u

estions, call or 

w

rite:

 

Rapid Engineering LLC

1100 Seven Mile Road, NW
Comstock Park, MI 49321
Telephone: +1.616.784.0500
Toll Free: 800.536.3461
Fax: +1.616.784.1910

www.rapidengineering.com

Rapid Engineering LLC's liability, and your exclusive 
remedy, under this warranty or any implied warranty 
(including the implied warranties of merchantability 
and fitness for a particular purpose) is limited to 
providing replacement parts during the term of this 
warranty. 

Some j

u

risdictions do not allo

w

 limitations on 

ho

w

 long an implied 

w

arranty lasts, so this limitation may 

not apply to yo

u

. There are no rights, 

w

arranties or 

conditions, expressed or implied, stat

u

tory or other

w

ise, 

other than those contained in this 

w

arranty.

Rapid Engineering LLC shall in no event be 
responsible for incidental or conse

q

uential damages 

or incur liability for damages in excess of the amount 
paid by you for the RAPID™ NP. 

Some j

u

risdictions do 

not allo

w

 the excl

u

sion or limitation of incidental or 

conseq

u

ential damages, so this limitation or excl

u

sion 

may not apply to yo

u

. This 

w

arranty gives yo

u

 specific 

legal rights, and yo

u

 may also have other rights 

w

hich vary 

from j

u

risdiction to j

u

risdiction.

Rapid Engineering LLC shall not be responsible for fail

u

re 

to perform 

u

nder the terms of this 

w

arranty if ca

u

sed by 

circ

u

mstances o

u

t of its control, incl

u

ding b

u

t not limited to 

w

ar, fire, flood, strike, government or co

u

rt orders, acts of 

God, terrorism, 

u

navailability of s

u

pplies, parts or po

w

er. 

No person is a

u

thorized to ass

u

me for Rapid Engineering 

LLC any other 

w

arranty, obligation or liability.

LIMITATIONS ON AUTHORITY OF 
REPRESENTATIVES:

No representative of Rapid Engineering LLC, other than 
an Exec

u

tive Officer, has a

u

thority to change or extend 

these provisions. Changes or extensions shall be binding 
only if confirmed in 

w

riting by Rapid Engineering LLC's 

d

u

ly a

u

thorized Exec

u

tive Officer.

Содержание CTHN-40





































































































Отзывы: