9. TRANSPORT AND EQUIPMENT
Secure the device during transport to prevent its overturning, damage to the
paint coating and breaking of the glass elements. When handling the device do
not press the glass elements, do not grab the cooling unit protective grid to lift
the device. Do not lift the refrigerator directly with a forklift truck or a pallet jack
without a pallet, as this may damage the cooling unit.
The device must be transported in its operating position!
10. TEMPERATURE CONTROLLER MANUAL
DISPLAY DESCRIPTION
The display is three digits with decimal point and 6 symbols (compressor, fan,
defrost, AUX, alarm and clock).
1. COMPRESSOR
The symbol is visible when the compressor operates. It flashes when the
compressor’s start up is delayed because of protective procedure. It flashes in the
cycle: two flashes – break when there is continuous operation mode activated.
2. FAN
The symbol is visible when there are evaporator fans switched on. It flashes when
the fans start-up is delayed by means of external switching off or when there
is other procedure in progress.
3. DEFROST
The symbol is visible when there is defrost function switched on. It flashes when
the defrost start-up is delayed by means of external switching off or when there is
other procedure in progress.
4. AUX
The symbol is visible when there is additional AUX output activated.
5. CLOCK
The symbol is visible when there is clock switched on – switching on by means of
„tEn”
switch or when there is time limit set. When switching on the symbols
appears for few seconds as clock function availability.
6. ALARM
The symbol is visible when there is alarm activated.
