QUICK START GUIDE
en-9
CONTROLS
AUXILLARY HYDRAULIC SERVICES KIT
SWITCH (OPTIONAL)
This switch sets the rotary brush or snow
blade to a right side or a left side forward
position.
Push the top of the rocker switch to set a
right side forward position.
Push the bottom of the rocker switch to set a
left side forward position.
1.
Release brake - Make sure the parking
brake is released before you try to go
forward or reverse.
2.
Forward - Carefully push the top (A) of
the forward/reverse foot pedal to reach
correct ground speed.
3.
Reverse - Carefully push the bottom (B)
of the forward/reverse foot pedal to
reach correct ground speed.
4.
To stop - Carefully return the forward/
reverse foot pedal to the neutral
position.
5.
To hold the vehicle stopped on a slope
it can be necessary to apply an amount
of forward or reverse traction.
NOTE:
•
Use complete foot to operate both
forward and reverse.
•
Do not move the pedal suddenly,
always operate slowly and carefully. Do
Not move the pedal with force from
forward to reverse or reverse to
forward.
