QUICK START GUIDE
en-11
HOW TO MOW
1.
Make sure that the speed limiter is set in
the mow position
2.
Release any transport locks and lower
the cutting units with the joysticks.
3.
To engage the cutting mechanism,
press the upper half of the cutting unit
switch, found on the control panel.
4.
Release the parking brake and drive in
a forward direction.
4.
Set a speed compatible with the surface
and gradient you are cutting. When you
operate at speed, danger is increased
and the quality of cut will be
compromised.
When the optional Stability Warning
System is installed
When the mower is driven on a slope of more
than its safe limit, a warning is shown on the
visual display unit. At 22degrees the centre
and upper unit is lifted 4-6 inches above the
ground and all units stop. This makes the
machine stable. This condition continues
until the mower is moved to a safer area.
NOTE
Always set the throttle to the maximum engine speed. If you find wet or thick grass
difficult to cut, decrease the forward speed to increase hydraulic pressure to the
cutting motors.
NOTE
Always set the throttle to maximum engine speed to cut the grass. When the grass
is heavy or the engine is under stress, decrease forward speed on the forward/
reverse foot pedal.
MOWING
