Ransomes CT325, Инструкция для оператора

Страница: 13 / 72

11
CONTROLS AND INSTRUMENTS
Figure 11. A diagram showing the shift pattern is
shown on the bezel around the gear shift lever.
Range selector is located at the left-hand side of the
seat, Figure 12. Three forward and one reverse
speed are provided for each of the three ranges.
This provides a total of 9 forward and 3 reverse
speeds.
FOUR-WHEEL DRIVE
The shift lever for the four-wheel drive is located on
the top left-hand side of the rear-axle centre
housing, Figure 12
Full forward on the lever disengages the four-wheel
drive (OFF). Full rearward engages the four wheel
drive (ON).
Figure 12 - Four-Wheel Drive Lever
CLUTCH PEDAL
The foot-operated clutch pedal, Figure 13, must be
completely depressed to stop forward travel and
P.T.O. shaft rotation. Always fully depress the pedal
when changing gear ratios or engaging four-wheel
drive.
DUAL CLUTCH (OPTIONAL)
A dual clutch option is available which allows
stopping tractor movement while the P.T.O. shaft
continues rotation.
Figure 13 - Clutch Control
When the clutch pedal is depressed to position (1),
Figure 14,the tractor movement stops while the
P.T.O. shaft continues rotation (if the P.T.O. is
engaged). If the pedal is depressed completely (2),
both tractor and P.T.O. motion stop.
Figure 14 - Dual Clutch (Optional)
TRANSMISSION P.T.O CONTROL LEVER
The transmission P.T.O. and mid P.T.O. (if
equipped) control levers are shown in Figure 15.
They engage and disengage the P.T.O. 5. If the
tractor engine is running, always depress the clutch
pedal fully before moving the lever. Move the lever
forward to engage the rear P.T.O. and rearward to
disengage.
For mid P.T.O. move the lever up to engage and
down to disengage (if so equipped).
11