4. Remove porting block.
5. Remove fluid valve cartridge O-ring.
NOTE
Block must be pulled out with fingers rocking
the part side to side while pulling.
NOTE
Only remove fluid valve cartridge if parts are
being changed.
6. Push on edges to remove fluid valve cartridge.
Re-assembly
1. Install porting block on motor. Align screw heads
into porting recess.
2. Align motor slots with 3 tab arms.
NOTE
There is only one way to install the motor.
3. Install cartridge then o-ring (if removed).
AH-15-01.2
36
Ranflex Applicators
-
MAINTENANCE
