![Rans S-7LS Courier Скачать руководство пользователя страница 60](http://html1.mh-extra.com/html/rans/s-7ls-courier/s-7ls-courier_pilot-operating-handbook_3675389060.webp)
Rans Inc.
Section 6
Model S-7LS COURIER
Normal Procedures
Original Issue
March 3, 2005
6- 6
4 Left Wing
(1)
Wing tip – CHECK security
(2)
Pitot tube – CHECK security
(3)
Leading edge – CHECK condition, dents, nicks
(4)
Wing Tie Down - DISCONNECT
(5)
Forward lift strut and jury strut- CHECK security, dents, nicks
(6)
Fuel quantity – CHECK visual for desired level
(7)
Fuel filler cap – CHECK secure
(8)
Main wheel tire – CHECK for proper inflation
(9)
Main Wheel – CHECK security, brake
(10)
Fabric(Surface)- CHECK- for rips, tears, damage
5 Nose
(1)
Fuel quick drain valve on bottom of cowling (left side); - DRAIN at least a
cupful of fuel (using sampler cup) to check for water, sediment and proper
fuel grade before first flight of day and after each refueling. If water is
observed, take further samples until clear, and than gently rock the wings
to move any additional contaminants to the sampling points. Take
repeated sampling from all points until no contamination is found
(2)
Engine oil dipstick/ filler cap- CHECK oil level, than check filler
cap secure. Prior to oil check turn the propeller several times by hand to
pump oil from the engine into the oil tank, or let the engine idle for 1 min.
This process is finished when air is returning back to the oil tank and can
be noticed by a murmur from the open oil tank.
WARNING
–Do not stand within the arc of the propeller, check ignition
off, throttle closed and park brake set before rotating the propeller by
hand.
(3)
Carburetor and air filter – CHECK security
(4)
Radiator fluid over -flow bottle – CHECK fluid level
(5)
Propeller and spinner – CHECK for nicks, dents and security
(6)
Engine cooling air inlets and oil cooler – CHECK of obstructions
(7)
Engine cooling air outlet, radiator – CHECK of obstructions
(8)
Exhaust – CHECK –loose damage
6 Right Wing
(1)
Main wheel tire – CHECK for proper inflation
(2)
Main Wheel – CHECK security, brake
(3)
Fuel quantity – CHECK visual for desired level
(4)
Fuel filler cap – CHECK secure
(5)
Forward lift strut and jury strut- CHECK security, dents, nicks
(6)
Wing Tie Down - DISCONNECT
(7)
Leading edge – CHECK condition, dents, nicks
(7)
Wing tip – CHECK security
(8)
Fabric (Surface)- CHECK- for rips, tears, damage