8
GB
Use
Please get familiar with the operating instructions fi rst before using. Misuse or careless use
may hurt the user himself and the hand pump.
Please connect the hand pump and the air reservoir. The fi ller adaptor is included in your
purchase. Please use them under the guidance of this manual.
NOTE: Read the whole manual before fi lling to make sure you fi ll it correct.
Check if the bleed valve is tightened and the air rifl e is cocked. The air rifl e MUST be cocked
(without pellets!) in order to fi ll the air tank.
Stand on the base plate when fi lling to stabilize the hand pump.
Make sure there’s no knot on the hose before fi lling. Pump it to the bottom every time. When
the pressure reaches 100 bar, normally it will be hard to fi ll any more.
After charging, loose the bleed nut fi rst, then take the fi ller probe out of the air tank.
WARNING!
There must be a one-way valve on the air tank. Do not dismantle any connecting parts when
there’s some residual air in the hand pump, which will be incredibly dangerous.Do not put
your fi nger near the air hole or at anyone when you turn off the bleed nut. The bleed oil or
water will stain your hand or other person if you pay less attention.
Handle
Main parts of the
pump
Hose
Screw M4×30 × 2
Oil plug
O-ring D25.6-3.1
O-ring D8-2.0
O-ring D30-3.5
O-ring D3.5-1.5
O-ring D5.2-1.2
Third stage piston seal
Circlip
Dismantling device
Allen key
Block
Parts
Spareparts
