Ranpump B15-AX, Руководство по эксплуатации и техническому обслуживанию

Страница: 3 / 24

3
WARNING !
Always wear appropriate clothing and equipment, such as
eye protection and breathing apparatus to protect yourself.
WARNING !
Improper handling, splashing in the eyes, ingestion, or bodily
contamination of hazardous fluids or inhaling toxic vapors can
cause extremely serious injury or death. Observe all the
following precautions when handling known or potentially
hazardous fluids.
WARNING !
Altering or modifying any part of this equipment, using eroded
or damaged spare parts, or using this pump for inappropriate
media may cause the parts to break or be damaged. Thus, the
media inside the pump may spill or squirt onto people in the
vicinity and sensitive areas, such as eyes. Moreover, it may
cause a fire, blast, or physical damage.Use only genuine RAN™
parts and accessories.
WARNING !
Never use 1,1,1-trichloroethane, methylene cloride, other
halogenated hydrocarbon solvents or fluids containing such
solvents in aluminum pumps. Such use could result in a
serious chemical reaction, with the possibility of explosion,
which could cause death, serious injury, and/or substantial
property damage. Consult your fluid suppliers to ensure that
the fluids used are compatible with aluminum parts.
WARNING !
Running the pump with hot liquids may cause the surface of
the pump to heat up above 80 C
o
. Under these conditions, it
is pump owner’s responsibility to place a warning for the
operator not to touch the pump without appropriate
protective equipment to reduce the risk of severe burns.
1.1. W
arnıng symbols on dıaphragm pump
No Warning
Location on
pump
Instruction
1 Pump Name Plate Exhaust Cover Pump Data
1.2. Conformity to eu directives and standards
All the diaphragm pumps produced comply with the below listed EC directives and standards.
2006/42/EC Safety of Machinery
EN ISO 12100 Safety of machinery -- General principles for design-
Risk assessment and risk reduction
DIN EN 809 Pumps and pump units for liquids - Common safety requirements
EN ISO 4414 Pneumatic fluid power -- General rules and safety requirements for systems and their
components