Rankin LS-20-1 Скачать руководство пользователя страница 15

11

OPERATING SAFETY

1.

Read and understand the Operator’s
Manual and all safety signs before operat-
ing, servicing, adjusting, repairing or un-
plugging.

2.

Do not allow riders.

3.

Install and secure all guards and shields
before starting or operating.

4.

Keep hands, feet, hair and clothing away
from moving parts.

5.

Place all controls in neutral, stop tractor
engine, set park brake, remove ignition key
and wait for all moving parts to stop before
servicing, adjusting, repairing or unplugging.

6.

Place all tractor and machine controls in
neutral before starting.

7.

Always wear the appropriate personal
safety equipment when operating splitter
including but not limited to hard hat, safety
shoes, face shield and heavy gloves.

8.

Clear the area of bystanders, especially
small children, before starting.

9.

Do not operate on slopes or sidehills.

10. Keep working area clean, neat and dry to

prevent slipping and tripping.

11. Keep all mechanical and hydraulic compo-

nents in good condition.  Do not operate
with leaks or damaged components.

12. Load splitter by holding logs on the side

rather than the top and bottom.

13. Do not split wood across the grain.

14. Review safety instructions with all operators

annually.

4.1     TO THE NEW OPERATOR
           OR OWNER

The 3 Point Hitch Log Splitter is designed to split
any kind of wood or log.  Be familiar with the
machine before starting.

It is the responsibility of the owner or operator
to read this manual and to train all other
operators before they start working with the
machine.  Follow all safety instructions ex-
actly.  Safety is everyone's business.  By
following recommended procedures, a safe
working environment is provided for the
operator, bystanders and the area around the
worksite.  Untrained operators are not quali-
fied to operate the machine.

Many features incorporated into this machine are
the result of suggestions made by customers like
you.  Read this manual carefully to learn how to
operate the machine safely and how to set it to
provide maximum field efficiency.  By following the
operating instructions in conjunction with a good
maintenance program, your Log Splitter will
provide many years of trouble-free service.

4     OPERATION

Содержание LS-20-1











































Отзывы: