Rankin 520, Инструкция по эксплуатации, обслуживанию и ремонту

Страница: 19 / 32

LUBRICATION (C
ONTINUED
)
- F, G (Picture 5 - 6) Hydraulic motor guide
HYDRAULIC OIL LEVEL CONTROL
Every 250 hours check the oil level in hydraulic tank "G" (picture 7) through the oil level plug "F".
The proper level should be about 4/5 of the tank. If it is necessary to raise the level, enter new oil through the
plug "F", having the same characteristics of the oil in the tank. The machine is supplied by the manufacturer
with hydraulic oil.
OIL FILTER REPLACEMENT CARTRIDGE
Replace the hydraulic oil f lter cartridge in the f rst
50 hours and then every 250 hours thereafter.
- Place a clean container, to collect any spilled
oil, under the f lter cartridge "H".
- Unscrew the cartridge.
- Lubricate the seal of the new cartridge with the
same oil, then screw and tighten it with your
hands.
- Check the oil level as above.
MAINTENANCE
17
Picture 5
Picture 6
Picture 7
_________________________________________________________________________________
Before injecting lubricating grease into the zerks,
clean them thoroughly to prevent mud, dust, or other
foreign matters from mixing with the grease, thus
diminishing the lubrication effect.
_________________________________________________________________________________