3
ALL SERVICE SHOULD BE DONE BY QUALIFIED PERSONNEL FROM A COMMERCIAL GAS
EQUIPMENT SERVICE AGENCY OR THE GAS SERVICE DEPARTMENT OF YOUR LOCAL GAS
UTILITY COMPANY. DISCONNECT POWER SUPPLY BEFORE SERVICING.
ANY SERVICE UNDER WARRANTY MUST BE AUTHORIZED BY FACTORY
For appliances equipped with casters, the installation shall be made with a connector that complies with the standard
for connectors for movable gas appliances, ANSI Z21.69 (Latest Edition), and a quick disconnect device that
complies with the standard for Quick Disconnect devices for use with gas fuel, ANSI 21.41 (Latest Edition).
Adequate means must be provided to limit the movement of the appliance without depending on the connector and the
quick disconnect device or its associated piping to limit the appliance movement.
Note: If the appliance is removed from it's original installed position, the caster locks must be switched back on.
