TF2181103-BA-00 English
Page 6 of 16
20180508 V.1
LP Tank Filling
Use only licensed and experienced dealers.
LP dealer must purge tanks before filling.
Dealer should NEVER fill LP tank more than 80% of LP tank volume. Volume of propane
in tanks will vary by temperature.
A frosted regulator indicates gas overfill. Immediately close LP tank valve and call LP
gas dealer for assistance.
Do not release liquid propane (LP) gas into the atmosphere. This is a hazardous
practice.
To remove gas from LP tank, contact an LP dealer or call a local
FIRE DEPARTMENT
for assistance. Check the telephone directory under
“GAS Companies” for nearest
certified LP dealers.
LP Tank Exchange
Many retailers that sell appliances offer you the option of replacing your empty LP tanks
through an exchange service, Use only those reputable exchange companies that
inspect, precision fill, test and certify their cylinders. Exchange your tank only for an
OPD safety feature-
equipped tanks as described in the “LP Tank” section of this
manual.
Always keep new and exchanged LP tanks in upright position during use, transit or
storage.
Leak test new and exchanged LP tanks BEFORE connecting to appliance.
LP Tank Leak Test
For your safety
Leak test must be repeated each time LP tank is exchanged or refilled.
Do not smoke during leak test.
Do not use an open flame to check for gas leaks.
Appliance must be leak checked outdoors in well-ventilated area, away
from open flames or sparks.
Use a clean paint brush and 50/50 soap and water solution.
Use mild soap and water. Do not use household cleaning agents.
Damage to gas train
components can result.
Brush soapy solution onto all metal seams and entire valve area.
Regulator Hose Assembly Check
Before each use, check to see if there is evidence of abrasion, wear, cuts or leaks. The
regulator hose assembly must be replaced prior to the appliance being put into
operation. The replacement hose assembly must be that specified by the manufacturer.
WARNING
If “growing” bubbles appear, do not use or move the LP tank. Contact an LP gas supplier or
your fire department.
