TF2181103-BA-00 English
Page 13 of 16
20180508 V.1
3. Assemble the Burner Bracket (7) to Welded Stand (6) by using 4pcs bolts (A) and 4pcs
flange nuts (B).
4. Remove the nut (on the threaded pin) of the burner (4) and insert the burner into the
stand.
Insert the threaded pin at the bottom of the burner into the center hole of the burner
bracket. Make sure the alignment pin seat in the notch on the edge of the burner bracket.
Align with the burner pins, then fix the Heat Shield (8) outside the supporting bar and
secure with the removed nut.
