Rankam Member's Mark GR2298901-MM-02, Инструкции по сборке и эксплуатации

Страница: 23 / 31

23 of 31 20190827-Ver.1.0
LIGHTING INSTRUCTIONS
BEFORE LIGHTING
WARNING
 Inspect the gas supply hose prior to turning the gas ON .
 If there is evidence of cuts, wear, or abrasion, the hose must be replaced prior to use.
 Do not use the grill if the odor of gas is present.
 Only the pressure regulator and hose assembly supplied with the unit should be used.
 Perform the “ LEAK TEST ” according to the instructions before operating the grill
 ALWAYS keep your face and body away from the burner while lighting.
LIGHTING THE MAIN BURNER OF THE GRILL
1. Read instructions before lighting.
2. Make sure all control knobs are in the "
OFF " position.
3. Turn ON gas valve from LP tank.
4. The IGNITION BURNER is the 3
rd
control knob from the left. Light it first. Press and turn the
3
rd
control knob slowly to " HI ". Burner should light immediately.
5. If ignition does NOT occur in 5 seconds, turn the burner controls off, wait 5 minutes, and
repeat the lighting procedure.
6. Once the IGNITION BURNER is lit, you may light burners 2, 1 and 4 in this order. Just press
and turn the control knob to “ HI ”.