Ranger RS-500-D-601, Инструкция по установке и эксплуатации

Страница: 3 / 40

RS Series Spray-Wash Cabinets
3
P/N 5900245 — Rev. B7 — November 2019
Table of Contents
Introduction 3 Operation 13
Shipping Information 4 Maintenance 16
Safety Considerations 4 Troubleshooting 19
Specifications 6 Wiring Diagram 21
Components 7 Labels 25
FAQ 10 Parts Diagrams 29
Setup 11 Maintenance Log 37
Introduction
This manual describes these Spray-Wash Cabinet models:
•
RS-500-D-601
: 1 Phase Spray-Wash Cabinet with 500 pound (227 kg) load capacity.
• RS-750-D-601 : 1 Phase Spray-Wash Cabinet with 1,000 pound (454 kg) load capacity.
• RS-500-D-503 : 3 Phase Spray-Wash Cabinet with 500 pound (227 kg) load capacity.
• RS-750-D-503 : 3 Phase Spray-Wash Cabinet with 1,000 pound (454 kg) load capacity.
The RS-500-D S -601 and RS-750-D S -601 models are a Stainless Steel alternative to the Powder-Coat
models; there are no differences in operation between the Powder-Coat models and Stainless Steel
models.
More information about the full line of Ranger Products is available at
rangerproducts.com .
⚠
WARNING Always use a
certified, licensed Electrician
for electrical work. Wiring the unit
incorrectly could result in human injury or product damage.
⚠
CAUTION Only use Detergent formulated for mild steel parts washers; Aluma-Klean, for
example, which is available from
the Ranger website . Do not use high alkaline,
high PH, caustic detergents that are formulated for harsher cleaning environments ;
hot dip tanks, for example. This voids your warranty and may cause significant
damage to your unit.
This manual is mandatory reading for all Spray-Wash Cabinet users , including anyone
who sets them up, operates, maintains, or repairs them.
⚠
DANGER
Be very careful when setting up, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Make sure to read and
follow the instructions on the labels on the unit.
Keep this manual on or near the equipment so that anyone who uses or services it can read it.