R980 Series of Tire Changers
26
P/N 5900158 — Rev. F - March 2022
Operation
This section describes how to use your Tire Changer.
It describes the main components involved in demounting and mounting Tires, followed by the
necessary procedures.
⚠
DANGER
Being in close proximity to a Tire Changer is a serious endeavor with potentially life-
threatening risks. Only trained, authorized, supervised personnel may be within 30
feet of the Tire Changer while it is in use.
Do not assume you are going to be
safe using the Tire Changer this time just because nothing
happened last time
.
Usage Precautions
Keep the following in mind while you use your Tire Changer:
•
Make sure all employees receive specific training in Tire demounting and mounting
before
they
are allowed to use the Tire Changer, that their training is verified through a testing program, and
that all training is documented. All others, including children and untrained personnel, must be kept
at least 30 feet away from the Tire Changer while it is in use.
•
Make sure new employees are trained and supervised in the performance of their duties.
•
Never perform any service on an
inflated
Tire;
always
fully deflate the Tire by removing the Valve
Core and letting the air escape before beginning work.
•
Never mount or change
damaged
Tires or Wheels.
•
When mounting Tires, identify the maximum allowed inflation pressure; it should be on the sidewall
of the Tire.
Do not exceed the maximum allowed inflation pressure of the Tire
.
•
Make sure the Tire is restrained for inflation: either internally clamped, held down by the
Centering/Inflation Tool, or in a Tire Inflation Cage (such as the
). Do not inflate a Tire if it is externally clamped; external clamping
interferes with inflation.
•
When using the Tire Changer, be careful of your hands; there are multiple pinch point dangers on
the unit.
Do not rest your hands on any part of the Tire Changer while using it
.
⚠
WARNING
The Air Chuck has a self-gripping clip so that you can clip it on when inflating a Tire,
which means you do not have to hold it in place during inflation.
Do not hold the
Air Chuck while you are inflating a Tire
. This leaves you very close to the
Tire, which could result in injury if there were a problem during the inflation. Instead,
clip the Air Chuck into position, move away from the Tire, then press and hold
down the Inflation Foot Pedal.
•
You
must
wear OSHA-approved (publication 3151) personal protective equipment at all times
when installing, using, maintaining, or repairing the Tire Changer. Leather gloves, steel-toed work
boots, eye protection, back belts, and hearing protection
are mandatory
.
•
When using the Tire Changer,
the operator must wear
ANSI-approved
eye protection at all times
:
safety glasses, a face shield, or protective goggles.
⚠
WARNING
Always wear ANSI-approved eye protection. An accident could cause significant
injuries to your eyes.
Содержание R980AT-L
