Ranger R80EX страница 25 Скачать руководство пользователя | Manualshive

Страница: 25 / 96

background image

R80EX Tire Changer

25

P/N 5900087 — Rev. B — Jan. 2020

Test the Tire Changer

Make sure the following items have been done

before

putting the Tire Changer into normal operation:

•

Check for pneumatic (air) pressure

. The Tire Changer requires pneumatic energy to

perform certain functions.
To see if the Tire Changer has air pressure, take the Air Chuck and lightly step on and hold down
the Inflation Foot Pedal. If air comes out, the Air Source is connected and working.

•

Test the power source

. Other Tire Changer functions require electric power. Step on and hold

down the Turntable Foot Pedal to check for electric power. If the Turntable turns, you have power.

•

Make sure there is Tire Lubricant available

. Your shop probably has a brand of Lube that

it prefers. Make sure some is in the Lube Bucket on the Tire Changer; be sure to cover it to keep it
from getting contaminated and/or drying up quickly.

Always use Lube

; it makes changing Tires

easier and helps prevent damage to the Tire and the Wheel. BendPak Ranger recommends using
Lube that is recommended by the manufacturer of the Tire you are changing.

•

Test the Tool Arms on the Assist Towers

. Manually move each Tool Arm separately from

side to side. Use the Assist Tower Controls to raise and lower the Tool Arms (they move up and

down together). If the Tool Arms can do these things, they are working correctly.

•

Change some non-customer Tires

. To get used to the Tire Changer, BendPak Ranger

strongly recommends

that all potential Operators change

multiple

non-customer Tires of

different types

before

they start changing customer tires.

Final Checklist Before Operation

Do the following things

before

putting your Tire Changer into normal operation:

•

Review the

Installation Checklist

to make sure all steps have been performed.

•

Make sure the Tire Changer is getting electric and pneumatic power.

•

Check to see that all Anchor Bolts are in position and tightened, if you anchored the Tire Changer.

•

Make sure all Operators have used the Tire Changer to change multiple non-customer Tires.

•

Leave the Manual with the owner/operator; make sure they keep it near the Tire Changer.

«
...
23
24
25
26
27
...
»

Содержание R80EX

































































































Отзывы:

Нет отзывов

Похожие инструкции для R80EX

Бренд: Fasep Страницы: 68

MS 65 OR RAC S80

Бренд: Beissbarth Страницы: 37

Бренд: Sicam Страницы: 56

JUMBO TCS 52 ANW MAXI

Бренд: Sicam Страницы: 100

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды