Ranger R80EX, Инструкция по установке и эксплуатации

Страница: 12 / 96

R80EX Tire Changer
12
P/N 5900087 — Rev. B — Jan. 2020
Finding a Location
Keep the following in mind when deciding on a location for the Tire Changer:
•
Power source
. The Tire Changer needs to be near an appropriate power source. Refer to
Connecting to Power
for more information.
• Floor . The Tire Changer is best used on a flat, Concrete floor.
• Clearance . The Tire Changer requires space around it. Refer to Clearance for more
information.
• Accessibility . You need some space to move the Wheels whose Tires you are changing to and
from the Tire Changer.
•
No contaminants
. The Tire Changer includes many precision parts. You need to keep it away
from sources of contaminants such as oil, grease, water, dirt, brake lathe chips, and so on.
Contaminants degrade the performance of the Tire Changer and may cause components to wear
out more quickly.
• Danger . When a Tire is on the Tire Changer, especially during inflation, you need to keep
everyone far away from it. Only the Operator should be within 30 feet of the Tire Changer when it is
in use.
Do not set up the Tire Changer in a well-travelled area
.
• No water . The Tire Changer has electronic components. If the Tire Changer gets wet while
turned on, those electronic components will likely short circuit and have to be replaced.
Set up the Tire Changer in a location where it will stay dry.
⚠
WARNING Do not use the Tire Changer if it is sitting in water. You will short circuit the
electronic components in the Tire Changer and you could electrocute yourself or
bystanders.