Ranger Fisherman Series, Руководство пользователя

Страница: 65 / 77

Your RangerTrail ® Trailer
GENERAL INFORMATION AND MAINTENANCE
Keep the hubs properly lubricated at all times as described in the hub
section of this manual.
Check all lights before each use of the trailer.
Check the tires for wear, cuts or other damage before each use and
replace as needed. Check tire pressure often. See tire sidewall for
maximum pressure and maximum load.
Check lug nuts for tightness before use. Torque lug nuts to 95-100 ft.
lbs.
Periodically check the winch strap and winch parts for any wear and
replace worn parts.
Remember… a small expense for preventive maintenance is much
less expensive now than a road-side breakdown later!
Steps for Determining Correct Load Limit
(1) Locate the statement “The weight of cargo should never exceed XXX
kg or XXX lbs.” on your vehicles placard.
(2) This figure equals the available amount of cargo and luggage load
capacity.
(3) Determine the combined weight of cargo and gear being loaded on
the trailer. That weight may not safely exceed the available cargo and
luggage load capacity.
CONTAINED OIL ORBITAL LUBRICATION (COOL) HUBS
2010 model Ranger COOL HUBS have a 3 year “No Touch” warranty.
There is no required maintenance for three years from the original date of
purchase. If for some unforseen reason the hub develops an oil leak, it
65
Trailer tires should be properly inflated
and maintained! The load-carrying
capacity of your trailer is based on the tire pressure. Inadequate tire
pressures can void your tire and trailer warranty and could also lead to
an accident damaging to people or equipment!
CAUTION
Lug nuts should be properly tightened
before each use. Failure to do so could
result in loss of a wheel and could lead to an accident causing injury or
death.
WARNING