33
Turntable Drive Belt Inspection / Adjustment.
DANGER!
The motor on this machine contains high
voltage. Disconnect power at the receptacle before
performing any electrical repairs. Secure plug so that it
cannot be accidentally plugged in during service.
1. Remove the Side Panel. (See Fig. 17.8)
2. Loosen the four Motor mounting / adjusting bolts and
nuts. (See Fig. 17.9)
3. Inspect the Drive Belt for cracking and wear and
replace as necessary. Adjust the Belt deflection to
3/8” - 1/2” using the Adjustment Bolt. Tighten all bolts
when adjustment complete. (See Fig. 17.10)
Fig. 17.9
Fig. 17.8
Fig. 17.10
