For technical support, contact us at 1-800-565-5321
3320-PC Installation Guide | REV. J2 | Page 9
NOTE: If you are installing a Composite Partition and your Promaster City is supplied with an oversized sliding
door handle, this handle must be removed in order for the door to close properly.
NOTE: Pulling the cable unlocked the
door.
PHASE 2 – INSTALLATION
2.2 VEHICLE PREPARATION
2.2.1 Removing handle.
Detach the plastic bracket on the cable from
the metal part of the handle, then slide the ca-
ble across the channel and pop out.
Tape or roll the cable.
TOOLS
q
Cordless Impact or Ratchet
q
Philips Screw Driver
q
T30 Torque Bit
Separate the two halves of the handle exposing the
two bolts at the top by removing the small philips
screws and the bolt at the bottom.
