Rangemaster Toledo FS Hob, Инструкция по установке и эксплуатации, Страница: 6 / 24

2
2. Hob Overview
The Toledo FS hob (Fig.2-1) has the following features:
A.
5 hotplate burners including a wok burner
B.
A control panel
C.
A warmer plate
Hotplate Burners
The drawing by each of the central knobs indicates which
burner that knob controls.
Each burner has a Flame Supervision Device (FSD) that
prevents the flow of gas if the flame goes out.
When the igniter button is pressed in, sparks will be
made at every burner – this is normal. Do not attempt to
disassemble or clean around any burner while another
burner is on, otherwise an electric shock could result.
To light a burner, push in and turn the associated control
knob to the high position as indicated by the large flame
symbol (

),
(Fig.2-2)
.
The igniter should spark and light the gas. Keep holding the
knob pressed in to let the gas through to the burner for about
ten seconds.
If, when you let go of the control knob, the burner goes out,
then the FSD has not been bypassed. Turn the control knob
to the OFF position and wait for one minute before you try
again, this time making sure to hold in the control knob for
slightly longer.
Adjust the flame height to suit by turning the knob clockwise
(Fig.2-3) .
If a burner flame goes out, turn off the control knob and
leave it for one minute before relighting it.
A
C
B
Fig.2-1
Fig.2-2
Fig.2-3
DocAUS.020-0004 - Overview - 110DF - Elan