4
ArtNo.090-0007 90 Ceramic:
oven steam out the back
•
Take care
NOT TO PLACE HOT LIDS
onto the hob
surface (
Fig. 1.5
). Lids that have been used to cover
a hot pan can “stick” or create a “vacuum” effect to
the Glass Hob. Should this occur,
DO NOT
attempt
to lift the lid off the glass surface, this may damage
the glass. Instead slide the lid to the edge of the hob
surface and remove, taking care not to scratch the hob
surface. Alternatively wait until the lid has cooled to
room temperature, the vacuum has been released, then
remove the lid by lifting it from the hob surface.
• DO NOT
place anything between the base of the pan
and the hob surface (e.g. asbestos mats, aluminium foil,
wok stand).
•
Take care
NOT
to place metallic objects such as knives,
forks, spoons and lids on the hob surface since they can
get hot.
•
We recommend that you avoid wiping any surface unit
areas until they have cooled and the indicator light
has gone off. Sugar spills are the exception to this (see
‘Cleaning your Cooker’). After cleaning, use a dry cloth
or paper towel to remove any cleaning cream residue.
•
The ceramic surface should be washed after use in
order to prevent it from becoming scratched or dirty.
However, you should clean the hob with caution as
some cleaners can produce noxious fumes if applied to
a hot surface.
• DO NOT
leave the hob unattended. Care should be
taken to not allow your cookware to boil dry. It will
damage your cookware and Induction Glass Hob.
•
After use, switch off the hob element by its control.
DO
NOT
rely on the pan detector.
Oven care
•
When the oven is not in use and before attempting to
clean the appliance
ALWAYS
be certain that the control
knobs are in the
OFF
position.
•
Use oven gloves to protect your hand from potential
burns.
•
Cooking high moisture content foods can create a
‘steam burst’ when the oven door is opened (
Fig. 1.6
).
When opening the oven, stand well back and allow any
steam to disperse.
•
The inside door face is constructed with toughened
safety glass. Take care
NOT
to scratch the surface when
cleaning the glass panel.
•
Accidental damage may cause the door glass panel to
fracture.
•
Keep oven vent ducts unobstructed.
• DO NOT
use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.
ArtNo.324-0001 Steam burst
ArtNo.312-0001 Not cooking surface
Fig. 1.5
Fig. 1.6
Fig. 1.7
Содержание Leckford 90 Induction
Страница 1: ...USER GUIDE INSTALLATION INSTRUCTIONS Built from experience U110566 02a Leckford 90 Induction...
Страница 4: ...ii...
Страница 41: ......
Страница 42: ......