Rangemaster Kitchener 100, Руководство пользователя и инструкции по установке

Страница: 39 / 48

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
35
W
(1 x L, 1 x S, 2 x M) Hotplate layout
Small burner
Medium burner
Large burner
Wok burner
S
M
L
W
Injector table for hotplate layout
Hotplate
Injector
Natural Gas LPG
Wok Burner
internal 78 internal 53
external 126 external 82
Large Burner 134 87
Medium Burner 109 68
Small Burner 75 51
Stick on Label
Stick the conversion gas label over the natural gas part of the
appliance data label. The table below indicates the correct
label to use.
Layout number LPG gas label number
1 Q030836
Conversion Kit Contents
Table 8.1 below describes the contents of the Universal
Conversion Kit:
Large Injector LPG 87 x 2
Medium Injector LPG 68 x 2
Small Injector LPG 51 x 1
Wok Injector (external) LPG 82 x 2
Wok Injector (inner) LPG 53 x 2
Grill Injector LPG 85 x 1
Oven Injector
Bypass screw thermostat
LPG 76 x 2
LPG 79 x 2
Pressure Testing
Connect the appliance to the gas supply. Check the appliance
is gas sound. See the injector table above for test pressures.
Pull the cooker forward, if necessary, to gain access to the
rear. The pressure test point is accessible on the connector
block at the upper right hand rear. Remove the test nipple
screw and fit a pressure gauge to the test point.
After checking the pressure replace the test nipple.
Check the appliance is gas sound.
Check operation of all the burners.
Table 8.1