EN
1
10
USE
A
B
C
D
E
Button
Function
A = Speed
Turn the motor on/off at speed one. Turn off each speed.
Turn the motor on at speed two / Activate charcoal filter alarm.
B = Speed
Pres and hold the button for approximately 2 seconds, with all the loads turned off
(Motor+Lights), to turn the Activated Charcoal Filter alarm on. LED
(A)
flashes
twice to confirm.
To Deactivated Charcoal Filter alarm off, press the button again and hold for at least
2 seconds.The relevant LED flashes once
(A)
. Only for recirculation mode.
Turn the Motor on at speed three / Reset alarm grease and charcoal filter saturation.
C = Speed
Pres and hold the button for approximately 2 seconds, with all the loads turned off
(Motor+Lights), to reset the grease and charcoal filter saturation alarm. LED
(A)
flashes three times.
D = Speed
Turn the motor on at
Booster
speed.
This speed is timed to run for 6 minutes. At the end of this time, the system returns
automatically to the speed that was set before. If it is activated with the motor
turned off, it will switch to OFF at the end of the time. To deactivate it, press button
D
or press button
A
.
E = Light
Pres briefly:
Turn the lighting system on and off at maximum intensity.