Rangemaster Eclipse 90, Руководство пользователя

Страница: 15 / 28

11
Fig. 2.10
Bridge Zone
Switching the Bridge Zone On
Touch the bridge function button to activate the bridge
zone (
Fig. 2.10 ). When the bridge zone function has been
activated the two left heater displays will show “b”, and “r”
Select the temperature setting by using the sliding button.
Increase the heat setting by pressing the right side of the
sliding button or decrease the heat setting by pressing the
left side of the sliding button.
The bridge element will be ready to use.
To boil the pan quickly, select the desired cooking level, then
press the “P” key to activate the Boost function.
Switching the Bridge Zone off
Touch the bridge function button the heater level will
automatically reduce to “0”. If the bridge cooking zone is hot,
“
H
” will be displayed.
Automatic Shutdown
The hob will automatically shutdown if you ever forget to
turn them off.
Depending on the power level each cooking zone is switched
off individually according to a determined maximum
operating time if the assigned cooking zone has not been
operated during this time.
Any change of the cooking zone condition with the
allocated buttons (setting/changing the power level for the
corresponding hotplate) resets the max. operating time of
this cooking zone to the starting value of the operating time
limitation.
Note: If the cooking zone is hot then an ‘H’ will flash
alternately along with the error code.
Over-Temperature Protection
A temperature sensor can monitor the temperature
within the Induction hob. When an excessive temperature
is monitored, the Induction hob will stop operation
automatically.
Small object safety
When an unsuitable size or non-magnetic pan (e.g.
aluminium), or some other small item (e.g. knife, fork, key)
has been left on the hob, the hob will automatically go into
standby within 1 minute. The fan will keep cooling down the
induction hob for a further 2 minute.