![background image](http://html1.mh-extra.com/html/rangemaster/belhd80/belhd80_instruction-manual_786076007.webp)
EN
7
7
Fitting the hood body
• Open the doors/the door (See section Open Panels).
• Remove the Metal grease filters using the handles provided.
• Adjust the two screws
Vr
, in the brackets
11a,
so that they are
at the start of their travel.
• Hook the hood body to the two brackets
11a
.
• From the inside of the hood body, turn screws
Vr
to level the
hood body itself.
• Fasten the safety screw
12a
.
• Close the doors/the door again.
12a
Vr
11a
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe ø 150 or 120 mm,
the choice of which is left to the installer.
• To install a ø 120 mm air exhaust connection, insert the re-
ducer flange
9
on the hood body outlet.
• Fix the pipe in position using sufficient pipe clamps (not sup-
plied).
• Remove possible charcoal filters.
ø 150
9
ø 120
Recirculation Version Air Outlet
To install the Recirculation Version of the hood, the Activated
charcoal filter must be fitted, see paragraph “ Activated charcoal
filter (Recirculation version)”.
• Screw the filter cover onto the air outlet, using four screws
12c
(2.9 x 12.5).
• Fix the directional grille
8
on the recirculation air outlet using
the 2 screws
12d
(2,9 x 9,5) provided.
16
12c
12d
8
Содержание BELHD80
