RR5055 Blade Grinder
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Switch the table back on,
the upper table should be
moving back and forth and
the blade should be coming
very close to the grinding
stone with the appropriate
angle
Turn the grinding motor
switch on
The table should be moving
back and forth and the
grinding stone should now
be spinning
The stone will not be
contacting the blade tooth
yet
Return to the silver handle,
located under the grinding
motor(21)
By adjusting this, you can
run the motor inwards and
outwards
Use this adjustment to line
up the grinding stone to
now touch the blade tooth
Now your machine should
be self-feeding one tooth
at a time and making a
small grind at the
appropriate angle for the
blade
Be sure to mark the start
point of the blade to
identify when the blade has
made a full circuit through
the grinder.
