Range Road EcoPro Series, Руководство пользователя

Страница: 9 / 18

EcoPro
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Page 9
Check The Following Each time the Processor is Used
What How
Hoses
Inspect for exposed wire mesh and leaks. Replace all worn or
damaged hoses before starting engine
Hydraulic Fittings
Inspect for cracks and leaks. Reseal or replace all damaged
fittings before starting engine
Nuts and Bolts Visually Check for loose bolts
Moving Parts Clear debris
Ram Valley
Clean Sawdust from slider area after every use to prevent
possible jamming
Grease Lightly lubricate Ram slider & log length adjuster every use
Chain Check saw chain for sharpness and correct tension
Bar Oil Ensure Bar Oil tank is full
Conveyor
If Conveyor Belt is not centered on pulleys use adjusting bolts to
correct position of belt
10 Hour Maintenance – Every 10 Hours of Operation
Nuts and Bolts Snug and Tighten all Bolts, Including Motor Mounts
Grease Grease 3 Conveyor Bearings
Grease Grease wheel hubs
Grease Log Rollers
Engine Oil Check level and cleanliness Use 10/30 Oil or as recommended
in Engine Manual
Hydraulic Oil Check level and cleanliness Use AW Series Hydraulic Oil Only
Air Filter Check & Clean Engine Air Filter if Necessary