9
Paging
You can use Zonetech’s
display
,
Info
knob, and
Left
/
Right
(
/
) buttons to edit the paging
settings.
To view Paging settings
, press the
Page
button.
To edit the Paging settings
, use the
Left
/
Right
(
/
) buttons to show the previous or
next setting (respectively). Turn the
Info
knob to adjust the value of each setting.
Note
:
To control the page settings remotely
, you can also use a web-based interface
on your computer (connected to the
Computer Ethernet port
), or an optional Rane RAD
device (e.g., RAD16z, RAD26, etc.) connected to the
Pager port
.
These are some of the editable pager settings which are most commonly used. The
abbreviated name (shown when the setting is not selected) is in parentheses.
Note:
For the complete list of settings shown in the display and their functions, download the
full
User Guide
.
Input Level
(
Level
)
This is the pager volume level:
-88.0
to
+12.0 dB
.
This is independent of the pager’s chime volume
level (see
) and independent of the Zone
level.
Chime
This determines whether the pager’s chime sound
is on (
Enabled
) or off (
Disabled
). The chime will be
mixed with the paging output signal.
Tip
: If this setting is on when you use the pager,
we recommend waiting a brief moment for the
chime to end before making an announcement.
Chime Level
(
CH Level
)
This is the volume level of the pager’s chime sound:
-30.0
to
+12.0 dB
(default:
0 dB
). This is
independent of the pager’s overall volume level.
