Rane MP26, Руководство оператора

Страница: 10 / 32

10
MP26
CLUB MIXER
Mixer Controls
Mic Inputs
Two Microphone Inputs are independent, each with these controls:
• Level control.
• Pan the signal from Left to Right.
• High / Low 2-band, full-cut tone controls. The range is Off to
+6 dB, with unity gain at 12 o’clock.
• FlexFX Assign takes the signal out of the Main Mix and sends
it to the FlexFX Loop.
• Mic On adds the Mic to the Main Mix as a program input. If
Talkover is engaged on the other Mic, this Mic is ducked like
any other program input.
• Talkover engages the Mic in the Main Mix and ducks all
program inputs. If Talkover is engaged on the other Mic, this
Mic is not ducked.
• Peak signal / rms meter displays the signal level with peak-
hold.
• Mic 1 front panel connector is intended for a wired dynamic
mic. A gooseneck mic is not recommended as it could damage
the jack and not be covered under Rane’s Warranty.
• Mic 2 allows selection of a Mic- or Line-level input via the
rear panel switch. Line-level is usually for wireless mics.
• Mic 1, Mic 2, or the Main Mix may be recorded via USB
Record-6. Record source selection is made in the computer’s
MP26 driver control panel.
Program Strips
•
Source
selection: Each program input x may select from
P
x ,
D
x ,
A1
,
A2
,
A3
, or
A4
.
•
Level
is Off to +12 dB, with unity gain at 12 o’clock.
•
High
/
Mid
/
Low
3-band, full-cut tone control range is Off to
+6 dB, with unity gain at 12 o’clock.
•
Filter
with Low-pass and High-pass:
• Flat response is in the center at 12 o'clock.
• Low-pass filter cut-off moves from 20 kHz toward 20 Hz as
the knob is turned counter-clockwise.
• High-pass filter cut-off moves from 20 Hz toward 20 kHz
as the knob is turned clockwise.
• The filter resonance can be switched high or low in the
computer’s MP26 driver control panel.
• The
A-B-Post
switch assigns the channel to A-side, B-side, or
Post-Crossfader.
•
FlexFX
assign takes the channel out of the Main Mix and
sends it to the FlexFX Bus (post-fader).
•
Cue
select assigns the channel to the headphones (pre-fader).
• Channel meter displays mono signal level with peak-hold.
• A 60 mm long-throw program fader controls the level of the
channel in the Main Mix.
• PGM 1-4 post-fader, stereo program channels are streamed
to the computer via USB record channels 1-4. These channels
may be recorded for post production editing and mix-down.
MIC 1
MP26
CLUB MIXER
MIC 2
CUE
SPLIT CUE
PHONES
BOOTH
LEVEL
LEVEL
LEVEL
PAN
PGM 1
CUE
LEVEL
PGM 2 PGM 3 ZONE MAIN PGM 4 FLEXFX
CUE
LEVEL
CUE
LEVEL
LEVEL LEVEL
A B
POST
A B
POST
A B
POST
A B
CONTOUR
POST
MIC ON
TALKOVER
FLEXFX
MIC ON
TALKOVER
FLEXFX
LEVEL / DEPTH
BEAT CUE
FILTER
BEAT
TIME TAP
PHASER FLANGER
ROBOT ECHO REVERB FLEXFX ON
LEVEL
HIGH
PAN
LOW
LEVEL
HIGH
PAN
LOW
FLEXFX
SEND
RETURN
LEVEL
FILTER
MID
HIGH
LOW
MID
HIGH
LOW
MID
HIGH
LOW
MID
HIGH
LOW
BALANCE
FLEXFX
FILTER
FLEXFX
FILTER
FLEXFX FLEXFX
MONO
USB LOOP
EXT LOOP
FILTER
SOURCE
D1 A3
A4 P1
A1 A2
SOURCE
D2 A3
A4 P2
A1 A2
SOURCE
D3 A3
A4 P3
A1 A2
SOURCE
D4 A3
A4 P4
A1 A2
CUE MAIN
10 0
2
4
8
6
10 0
2
4
8
6
10 0
2
4
8
6
10 0
2
4
8
6
10 0
2
4
8
6
10 0
2
4
8
6
10 0
2
4
8
6
10 0
2
4
8
6
10 0
2
4
8
6
HIGH LOW HIGH LOW HIGH LOW HIGH LOW
OL
+6
+3
0
-3
-12
-6
-18
MAX MIN
0
1
3
4
5
6
7
8
9
10
2
0
1
3
4
5
6
7
8
9
10
2
0
1
3
4
5
6
7
8
9
10
2
0
1
3
4
5
6
7
8
9
10
2
+6 OFF
+6 OFF
+6 OFF
+6 OFF
+6 OFF
+6 OFF
+6 OFF
+6 OFF
+6 OFF
+6 OFF
+6 OFF
+6 OFF 10 0
2
4
8
6
10 0
2
4
8
6
10 0
2
4
8
6
RIGHT LEFT
+6 OFF
+6 OFF
10 0
2
4
8
6
RIGHT LEFT
RIGHT LEFT
+6 OFF
+6 OFF