manualshive.com logo in svg

Rane MONGOOSE, Руководство по установке, Страница: 5 / 52

Поделиться
Скачать
Rane MONGOOSE Скачать руководство пользователя страница 5

MONGOOSE

Installation Manual

5

GettInG StarteD

Rane Corporation welcomes you to the world of the Mongoose. May it help erase all lingering memories 

of tangled analog cables!

To help you get started with the installation of the Mongoose system, we have provided a simple 

breakdown of the key tasks and have presented them in the recommended order. If you are new to the 

Mongoose system, we recommend that you spend a few moments reviewing the basics of the system 

before beginning the installation. We understand that your job is to get this system installed as quickly 

and efficiently as possible. That’s why we’ve kept the system overview short and sweet – you’ll be through 

it in no time – and the background information you gain will be well worth the detour. You can find this 

in "System Overview" on page 8.

Key Installation tasks

There are five key tasks involved in the installation of a Mongoose system. An overview of each task is 

listed below, along with page references to the specific details for each task. We recommend that you 

review this entire list to get a sense of the work flow, and then return to the first task to begin the actual 

installation process. As you complete each task, return to this section to determine the next step. Note 

that the order of some of these tasks can vary. See each task description for more details.

task 1: Install and connect the mongoose.

This task involves the physical attachment of the Mongoose hardware to your audio rack. You can perform 

this task off-site or on-site. Once installed, you then connect the Mongoose as appropriate – to the Ethernet 

network, to the CobraNet network, and/or directly to another CobraNet device. If you are installing on-

site, you may want to pull and terminate the shielded CAT 5e (or better) cabling first (see Task 3) so that 

the cables are ready to connect to the Mongoose. For details on installation, see "Task 1: Installing the 

Mongoose" on page 18.

task 2: configure the mongoose.

Before the system can function properly, you must configure the Mongoose and the RADs. You perform 

this configuration using the Mongoose Tracker software that is shipped with the Mongoose hardware 

(and is also available on the 

Rane website

). You can either configure the system by loading a configuration 

file that contains the appropriate settings and audio routing information, or you can edit the settings 

directly on a live device. We strongly recommend using a configuration file as a starting point.

In most cases, the audio designer will have already created this configuration file. This makes your 

installation job much easier because all you have to do is load the file into the appropriate device. For 

the purposes of this manual, we have assumed this to be the case – that the configuration file has already 

been created for you. If not – well, you’re going to need to do a little more reading. You can find some 

tips and overview information about configuration files in the 

Mongoose Design Manual 

(available on 

the 

Rane website

). But the best place to start is with the tutorials in the Mongoose Tracker help system. 

These tutorials walk you through the process of creating a configuration file. If the final configuration is 

to be completed later, but you merely want to install the equipment and make sure the system can send 

and receive audio, you can create a very simple configuration to accomplish this. See Task 5 for more 

information.

Содержание MONGOOSE





















































Отзывы:

Нет отзывов