Rane 1010X, Быстрые руководства пользователя

Страница: 44 / 48

44
Appendix ( English )
Technical Specifications
Analog I/O Type 10 in x 10 out
ADC
High definition audio 24-bit, 48 kHz, DR 116 dB A-
weighted
DAC
High definition audio 24-bit, 48 kHz, DR 116 dB A-
weighted
Frequency Response 20 Hz – 20 kHz, + 0.1 dB
Inputs Connection
(5) Euroblock connectors, 6 pins each, 3.81 mm pitch,
green. Ships with strain relief plugs.
Condenser
Mic Mode
Type
Active balanced, microphone input mode with 48 V
phantom power
Phantom Power + 48 V
Maximum Input 1 Vrms
Input Impedance 2.5 k
Ω
Each leg
Dynamic
Mic Mode
Type
Active balanced, microphone input mode without
phantom power
Maximum Input
250 mVrms
Input Impedance
2.5 k
Ω
Each leg
Line Mode Type Active balanced, line-level
Maximum Input
8 Vrms
Input Impedance
5 k
Ω
Each leg
Line+ Mode Type Active, left [+] & right [–] signals summed to mono
Maximum Input 8 Vrms
Input Impedance
5 k
Ω
Each leg
Outputs Connection (5) Euroblock connectors, 6 pins each, 3.81 mm pitch,
orange. Ships with strain relief plugs.
Type
Active balanced, line output mode with active output
transient muting
Maximum Output 8 Vrms
Impedance 300
Ω
Each leg
Frequency Response
20 Hz – 20 kHz, + 0.1 dB
DSP Processing Power >10,000 MIPS
Word Length 32-/64-bit Floating Point
Delay Memory Min. 160 sec total
Computer
Interface
Type
Ethernet 1000
base-T Zeroconf service discovery protocol
for easy setup
Connection RJ-45 Shielded Cat 5e cable or better
Length 300 ft. / 100 m Standard Ethernet cable length limit