Basic Operation
R&S
®
ZVA80
28
Quick Start Guide 1312.6808.62 ─ 02
Note the following differences between the R&S ZVA80-BU and the R&S ZVA50:
1. Option R&S ZVA50-B16, "Direct Generator/Receiver Access", provides 3 pairs of
1.85 mm (V) connectors at each test port, including ports 3 and 4. Use the additional
adapters supplied with the external test sets to connect the RF cables to SOURCE
OUT, REF IN, MEAS IN.
2. After a factory preset, the R&S ZVA50 is configured for measurements using the
internal test sets. Activate the "ZVA80-BU" mode explicitly before you connect the
external test sets; see
chapter 3.3, "Activating the ZVA80-BU Measurement Mode"
3.9 Additional Information
For a comprehensive description of R&S ZVA analyzers including frequency conversion
and remote control refer to the R&S ZVA help system or to the printable operating manual,
which is available for download at
http://www.rohde-schwarz.com/product/zva
Application notes related to frequency converters are also available for download, see
http://www.rohde-schwarz.com/product/zva-z
.
The text book "Fundamentals of Vector Network Analysis" by Michael Hiebel is an ideal
complement for the information given in the user documentation. The book combines
theoretical background and practical measurements on an R&S ZVA network analyzer.
In case of interest please contact your local R&S office.
Additional Information