R&S ZNL, Руководство пользователя

Страница: 155 / 1135

Network and remote settings
R&S
®
ZNL/ZNLE
155 User Manual 1178.5966.02 ─ 19
8.4.1 General network settings
Access : [SETUP] > "N Remote" > "Network" tab
The R&S ZNL/ZNLE can be operated in a local area network (LAN), for example to
control the instrument from a remote PC or use a network printer.
Network settings can only be edited in the firmware if a LAN cable is connected to the
R&S
ZNL/ZNLE.
Risk of network problems
All parameters can be edited here; however, beware that changing the computer name
has major effects in a network.
For details, see
Chapter 8.5, "How to set up a network and remote control" ,
on page 164.
Computer Name ..........................................................................................................156
IP Address ...................................................................................................................156
Subnet Mask ............................................................................................................... 156
DHCP .......................................................................................................................... 156
Network Configuration .................................................................................................156
Network and remote control settings