Manual Operation
R&S
®
UPV
137
Getting Started 1146.2078.62 ─ 09
Function
Front panel
PC keyboard
Mouse
Panel/graphical window
proportionally in its size
(horizontal and vertical)
Press MODIFY key,
change to the second
level using the >> but-
ton, activate F6 softkey
and resize the panel
using the rotary knob.
Press the shortcut ALT +
M, press the F12 key
and then F6 key, and
resize the panel using
the keys TAB and SHIFT
+ TAB.
Drag one corner of
panel.
Panel/graphical window
to the required size
Press the MODIFY key
and activate the Fix Size
Auto Size or Fix Size All
Auto Size All button.
Press the shortcut ALT +
M, then press the F10 or
F11 key.
---
Close all panels/panel on
screen
Press the MODIFY key,
change to the second
level using the >> button
and activate the F10
softkey.
Press the shortcut ALT +
M, the F12 key and then
F10 key.
---
4.4.4 Status Displays and Messages
In some cases, the user is presented with additional information on the screen. This
information includes status messages, messages concerning the value ranges, infor-
mation on settings, warnings and error messages.
4.4.4.1
Status Displays
The status of the R&S UPV is continuously displayed for the generator, analyzer,
sweep system and other instrument states at the bottom of the screen above the four
right-hand softkeys. Status displays always appear at the same position; they are
assigned to the fields above the softkeys as shown below.
A list of all possible status messages is available, see
chapter 4.20, "Overview of Sta-
4.4.4.2
Valid Value Range
Information on the possible entries is given at the bottom of the screen above the soft-
key bar. The ranges for value entries specified here always take the current status of
the instrument into consideration and therefore depend on the presets already config-
ured. Below is an example for entry of the generator output voltage:
The Display