background image

Maintenance, storage and disposal

R&S

®

TSMA6B-BP

27

Manual 4900.9099.02 ─ 02

R&S TSMA6-BC4
4-bay charger for R&S

 

TSMA6B-BP batteries

Replacing batteries

To replace an exchangeable battery

1.

NOTICE! 

Risk of data loss. If you disconnect the product from power when it

is in the ready state, you can lose settings and data. Shut it down first.
Proceed as described in 

Chapter 6.3.2, "Standby / power On/Off"

on page 21.

2. Disconnect the power supply and all accessories.

3. Fold out the tilt stand on the back of the product.

4. Open the battery cover.

5. Remove the old battery.

6. Insert the new battery R&S MNT_BP99WH with order number 3660.9109.02.

7. Close the battery cover and secure it.

8. Dispose of the old battery as described in

"Disposing batteries"

 

on page 30 .

Storing batteries

Ideally, store the battery in the product and follow the instructions in 

Chapter 8.3,

"Storage"

on page 30. Otherwise, observe the following rules:

Prevent short-circuiting of the batteries, which can happen if batteries touch
each other or come into contact with metallic objects in the storage container.
As storage container, you can use the product packaging.

Do not expose to direct sunlight.

Store the battery at room temperature.

Store the battery at a state of charge between 50

 

% and 70

 

%.

8.2.1

 

Charging the batteries

During operation with external power supply, the batteries are automatically
charged. Charging time for the batteries may differ depending on the connected
load as the maximum power consumption of the R&S

 

TSMA6B-BP is limited.

For charging the batteries, you have two possibilities:

Handling batteries

Содержание TSMA6B-BP


































Отзывы: