Configuring the R&S TSMA
R&S
®
TSMA
47
Getting Started 1177.5604.02 ─ 10
Figure 6-6: Scanner ready
For more details about the QualiPoc configuration and usage, refer to the user
documentation for QualiPoc
®
.
6.4.3
NESTOR and NESTOR Probe Mode
In the
"NESTOR"
mode, which can be started only if the R&S NESTOR is instal-
led, otherwise is dimmed, the R&S NESTOR software is hosted on the R&S
TSMA. The selection of a valid workspace file is required.
In the
"NESTOR Probe"
mode, the NESTOR application operates in a distributed
mode and only the NESTOR measurement engine is hosted on the R&S TSMA.
Configuration and control of the measurement is done on a remote PC.
To use the R&S TSMA in "NESTOR" mode, the following steps must be per-
formed.
Prerequisites:
●
R&S TSMA-NESTOR software package must be installed on the R&S TSMA.
The software package is pre-installed at delivery when the R&S TSMA is
ordered with NESTOR TSMA Option. (R&S No. 1522.8870.03).
Note:
The R&S
®
NESTOR software installation can be executed as a post
process to shipment.
●
Only for "NESTOR" mode
A dongle containing a smart card with R&S NESTOR option licenses must be
available.
Note:
If the R&S TSMA is delivered with a pre-installed R&S NESTOR soft-
ware, the NESTOR smart card is integrated inside the TSMA instrument and
no license dongle is necessary.
●
Only for "NESTOR Probe" mode
Measurement Modes
