Instrument Tour
R&S
®
SZU100A
14
Manual 1425.3061.02 ─ 04
Figure 6-1: Assignment of the test port adapter
1 = Hole for pin of the DUT
2 = Hole for additional pin
3 = Alignment pin
Refer to the data sheet for more details on the type of waveguide port.
Mounting the test port adapter
Mount the selected adapter to the waveguide port of the instrument using the
delivered screws and the special torque wrench for waveguide flange screws.
The R&S ZCTW (order no. 1175.2014.02) is especially designed for these tasks.
Figure 6-2: Recommended torque wrench R&S ZCTW
6.2
Rear View
The rear panel of the R&S
SZU provides the connectors and control elements
described below:
●
●
●
●
●
●
Trigger Input/Output Connector
Rear View
