Preparing for Use
R&S
®
Cable Rider ZPH
13
Getting Started 1321.0944.02 ─ 06
1. Unscrew the two thumb screws located on the battery compartment.
2. Open the cover.
3. Insert the battery into the R&S Cable Rider ZPH.
4. Close the cover and screw back the thumb screws.
You can operate the R&S Cable Rider ZPH with the AC adapter or the battery.
Both are included in the delivery.
3.1.4
Using the AC Adapter
Risk of instrument damage
To avoid instrument damage,
●
Only use the power supply (R&S HA-Z301, order number 1321.1386.02)
included in the delivery.
●
Make sure that the AC supply voltage is compatible to the voltage speci-
fied on the power supply unit.
●
Attach the appropriate adapter to the power supply.
Connect the AC adapter to the DC port on the left side of the R&S Cable Rider
ZPH (item 1 of
). Make sure to fully insert the AC adapter plug into the
DC port.
Depending on the system you need, firmly connect the appropriate power cable
included in the delivery to the AC adapter (item 2 of
).
Finally, connect the power cable plug to an AC power outlet.
Putting into Operation
